Polar Refrigeration GL178 Mode D'emploi page 5

Operation
Control panel
Adjusting the Temperature
1. Press SET button. The set temperature is displayed.
2. Press up button
3. Press SET button to exit.
Manual Defrost
1. To start manual defrost press defrost button
2. To stop manual or automatic defrost press defrost button
Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning
• Clean the interior of the appliance as often as possible
• Do not use abrasive cleaning agents. These can leave harmful residues
• Always wipe dry after cleaning
Cleaning the Condenser
Periodic cleaning of the Condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
GL178_ML_A5_v4_20190730.indb 5
or down button to change set temperature.
and hold for 6 seconds.
Refrigerant LED is on. Compressor is
running
Defrost LED is on. Unit is defrosting,
compressor is not running
Up Button
Down Button
Manual defrost button
SET
Set button
I/O
On/off
UK
5
2019/7/30 13:29