Description And Operation; Warning - Caution - Vortice C5 0.5 Notice D'emploi Et D'entretien

DESCRIPTION AND OPERATION

5-position speed adjuster for Vortice appliances. Not
suitable for timer, automatic, automatic timer and cord
operated appliances.
Can be converted for fitted installation using Kit
SCB5 (cod. 22483).

WARNING - CAUTION

!
Warning:
• Do not use this appliance for purposes other than
the proper purposes described in this manual.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact a professionally qualified electrician
or Vortice*. Do not leave packaging within the
reach of children or infirm persons.
• Certain fundamental rules must be observed when
using any electrical appliance, including: a) never
touch appliances with wet or damp hands; b) never
!
Caution:
this symbol indicates precautions that must be taken to avoid damaging the appliance.
• Do not make modifications of any kind to this
appliance.
• Do not expose this appliance to the weather (rain,
sun, etc.).
• Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance;
contact Vortice* immediately.
• If the appliance does not function correctly or
develops a fault, contact Vortice* immediately.
Ensure that only genuine original Vortice spares are
used for any repairs.
• Should the appliance be dropped or suffers a heavy
blow, have it checked by Vortice* immediately.
• Installation must be carried out by qualified
technicians only.
• The electrical system to which the appliance is
connected must conform to applicable standards.
• The appliance is double insulated and therefore
*(or an authorised Service Centre if you are outside the UK-Ireland territory)
8
this symbol indicates precautions that must be taken to avoid injury
touch appliances while barefoot; c) never allow
children or infirm persons to operate appliances
unattended.
• Store the appliance out of reach of children and
infirm persons after disconnecting it from the power
supply.
• Do not operate the appliance in the presence of
inflammable vapours (alcohol, insecticides, petrol,
etc.).
does not need to be earthed.
• The electrical power supply/socket to which the
appliance is to be connected must be able to
provide the maximum electrical power required by
the appliance. If it cannot do so, arrange for a
qualified electrician to make the necessary
modifications.
• Use a multi-pole switch with minimum contact gaps
of 3 mm or more to install the appliance.
• Switch off the appliance at the installation's main
switch: a) if the appliance does not function
correctly; b) before cleaning the outside of the
appliance, c) if the appliance is not to be used for
any length of time.
• Maximum applicable load 0.5 A.
• This symbol indicates that the operation
must be carried out by a suitably
qualified person.
ENGLISH