Descaling Procedure - ROSIERES RFV460EIX Manuel D'instruction

Care and maintenance

Descaling procedure

Warning: For safety reasons, the descaling
process cannot be interrupted and it takes
about 45 minutes.
The appliance can be descaled with the appliance
door open or closed. The appliance must be in
idle state prior to starting the descaling cycle.
To run a descaling cycle proceed as follows:
1. Press the Function
Duration Selection keys simultaneously. The
display shows
intermittent beep.
2. Press the Start/Stop key.
3. When the display shows "0.5L", remove the
water tank.
4. Pour 0.5 litres of an adequate descaling
solution into the water tank and put the water
tank back.
5. Press the Start/Stop key. The Descale cycle is
initiated and takes about 30 minutes.
Selection and
"CAL"
and there
6. When the display shows "1.0L" flashing and
the oven emits a beep, remove and empty the
water tank.
7. Wash the water tank and fill it with 1.0 litres of
cold water and put the water tank back.
8. Press the Start/Stop key. The first rinsing
cycle starts.
9. When the display again shows "1.0L" flashing
the
and the oven emits a new beep, remove and
is an empty the water tank.
10. Fill the water tank with 1.0 litres of cold water
and put the water tank back.
12. Press the Start/Stop key. The second rinsing
cycle starts.
13. When the rinsing cycle has finished the
display shows "End".
14. Remove, empty and dry the water tank.
EN
46