Hama Magnetic Touch 00178266 Mode D'emploi page 6

• Charging stops automatically once your device's battery is fully charged. The status LED
is now green.
• Remove your terminal device from the inductive charger and disconnect the charger from
the power supply.
• If no connection can be established through induction, you may have to change the
position of the adhesive pad.
Note
• Ensure that the mounting surface to which the adhesive pad is to attach (such as the
back of a mobile phone, GPS navigation system, etc.) is free of dust and grease. Use a
suitable cleaning agent from a specialised dealer to clean the surface.
• Various environmental factors such as ambient humidity, sunlight or cold can impair
the durability of the adhesive pad.
• We cannot guarantee that residue will not be left on the mounting surface after the
adhesive pad is removed.
• Place your terminal device on the inductive charger with the rear of the device to the
charger only.
Warning
• Take care that components such as airbags, safety areas, controls, instruments, etc.
and visibility are not blocked or restricted.
• Do not allow yourself to be distracted by the product, for example when driving a
vehicle or operating sports equipment. Always pay attention to the surrounding traffic
and your environment.
• Only use suitable charging devices or USB connections for charging.
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.
5