Publicité
Les langues disponibles
Les langues disponibles
solution or washed in the dishwasher. They should be
cleaned every 2 months, or more frequently if use is
particularly heavy.
• Install the grease rail into the back of the hood, into
•
the rangehood.
•
with the knobs facing out into the spring loaded slot.
in the back of the hood.
•
back in hood.
Replacing Activated Charcoal Filter
The Activated Charcoal Filters are not washable
and cannot be regenerated, and should be replaced
approximately every 4 months of operation, or more
frequently with heavy usage.
•
backwards) until it unlocks from the motor housing and
pull off sideways.
•
the side of the blower and push it inward. Then
"When used in recirculation mode, to
Caution:
Reduce the Risk of Fire and Shock use only conver-
sion kit Model FILTER 1 or FILTER1LL".
Lighting unit
• Remove the snap-on lamp cover
by levering it from under the metal
ring, supporting it with one hand.
• Replace the lamp with a new one
of the same type, making sure that
you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.
26
1
2
A
B
Gu10 self-ballasted led
lamps – listed in ac-
cordance with
ul 1993/nmx-
csa c22.2 No.
1993
Publicité
