Haier HC125FVS Guide De L'utilisateur page 10

English
9. Align the pin of the top hinge with top hole on the left
side of the door and push into place. Replace the screws in the
upper hinge bracket but do not tighten all the way. (see fig. # 1)
10. Make sure the door closes easily but forms a tight seal.
Adjust the door as needed. Once you are satisfied with the door
alignment, completely tighten the upper door hinge screws.
11. Replace the hinge cover, insert the screw and tighten completely.
(see fig. # 1)
12. If the door does not close properly, refer to the section titled "Door
Alignment".
9
lower hinge bracket
fig. # 4
spacet
door pin
fig. # 3
lower hinge
lower hinge support