Switching Off The Heating System; Switching On The Intermediate Stage; Deleting A Transmitter - Stiebel Eltron IA Utilisation Et Installation

Switching off the heating system / deleting a transmitter

Switching off the heating system

Press the STOP button.
I M P O R T A N T !
The short-wave infrared radiant heater can only be
switched off completely by unplugging the mains
plug on the radiant heater.

Switching on the intermediate stage

!
P R E R E Q U I S I T E !
The transmitter is programmed.
1. Briefly press the ▲ button twice in succession.
The radiant heater heats with approx. 66 % of its rated power.
2. Briefly press the ▼ button twice in succession.
The radiant heater heats with approx. 50 % of its rated power.
Deleting individual channels
1. Select the channel to be deleted.
2. Press simultaneously:
• Programming button P
• STOP button
3. Hold down this button combination for approx. 6 sec. until the
LED lights orange briefly and then red.
}
on the programmed transmitter
- 2 8 -