Programming Additional Transmitters - Stiebel Eltron IA Utilisation Et Installation

Programming additional transmitters

Press the
4.
▼ button within
the first 2 sec.
of the program-
ming phase
during the 50 %
heating cycle.
Programming additional transmitters
Programming possible for max. 16 transmitters.
To program further transmitters, proceed as follows:
1.
Programmed transmitter
Press the
2.
▲ button
within the first
2 sec. of the
programming
phase during
the 100 %
heating cycle.
The transmitter is programmed.
- 2 6 -
Heating switches off.
Press the buttons
for approx. 3 sec.
The heating system
alternates between
100 % and 50 %
heating power for
2 minutes.
Heating switches off
for a short time.