Stiebel Eltron IA Utilisation Et Installation page 23

Initial operation
W A R N I N G !
Receiver becomes hot during operation!
Risk of burning!
• Ensure that there is sufficient ventilation for the
IR Radio dimmer.
• Do not use highly flammable materials in the vicinity
of the IR Radio dimmer.
Optimal use of the radio signal
• Do not bend the antenna.
• Do not shorten or extend the antenna.
• If reception is poor, adjust the antenna.
• Install the antenna so that it is as exposed as possible.
• Antenna is not to rest on metal.
N O T E !
Radio systems, which operate on the same frequency,
can lead to reception interferences.
Please note that the range of the radio signal is
limited by the government and the built environment.
Explanation of device
- 2 3 -