Table des Matières
Publicité
MANUAL BUTTONHOLE
* Use the automatic buttonhole foot up to 1 3/4 "(45 mm) in length,
but don't lower the buttonhole lever or a beep will sound.
* Use the satin foot to create larger buttonholes.
* Carefully mark the buttonhole length on your garment. Place
the fabric with the buttonhole marked under the buttonhole
foot. Slide the foot forward so that the needle pierces the
fabric at the beginning of the buttonhole.
PROCEDURE
1. Start the machine to form first bartack and left side of
buttonhole.
2. Sew second bartack and stitch backward until needle
reaches beginning of buttonhole.
3. Stitch forward to the end of buttonhole mark to complete
buttonhole.
4. Push the reverse stitch button to tie off the stitches.
NOTE: If stitch length is manually set at 0.75 (mm) for
step 1, set the stitch length at 0.75 (mm) for step 3 as
well.
68
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
1
2
3
4
Publicité
Table des Matières
