How To Attach A Humidifier; Attach A Humid Aire 3 I Humidifier; Attach A Humid Aire Humidifier - ResMed S8 Escape Manuel Utilisateur

H A
OW TO TTACH A
A H
TTACH A UMID
Please refer to the illustration in section E of the illustration sheet, and your HumidAire 3i
manual.
The H A
UMID IRE
humidification. No other accessories are required for its use.
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Escape (see section A of the illustration
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
S
TORING THE
Store the H
UMID
not in use.
A H
TTACH A UMID
Please refer to the illustrations in section I of the illustration sheet.
To connect your
21" (52 cm) air tubing.
1
Fill the H A
UMID
medium 21" (52 cm) and long 6'6" (2 m) air tubing (I-1), and close the humidifier lid.
2
S8 E
Place the
SCAPE
medium air tubing to the air outlet (I-3).
Note: To avoid water spilling into the
3
Assemble your mask system and connect it to the free end of the long air tubing (I-4).
4
H
Plug the
UMID
cord to the socket at the rear of the
outlet.
Please refer to the HumidAire User's Manual for further details.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
S8 E
The
SCAPE
H
UMIDIFIER
A 3 H
i
IRE UMIDIFIER
3i attaches to the front of the
H A 3
i
UMID IRE
A 3i in the larger, mesh-top pouch of the
IRE
A H
IRE UMIDIFIER
S8 E to a H
SCAPE UMID
water chamber and place inside the
IRE
H
on top of the
UMID
S8 E
A
power cord into a power outlet. Connect the
IRE
is now ready for use with the
S8 E to provide heated
SCAPE
A humidifier you need medium sized
IRE
H
UMID
A
(I-2) and connect the free end of the
IRE
, do not put it underneath the humidifier.
SCAPE
S8 E and plug the other end into a power
SCAPE
H A
.
UMID IRE
H
OW TO
S8 E carry bag when
SCAPE
A . Connect the
IRE
S8 E
power
SCAPE
A H
TTACH A UMIDIFIER
13