Philips Inspiration Elite Mode D'emploi page 5

Care and cleaning of your Inspiration Elite
CAUTION:To reduce risk of electric shock, DO NOT DISASSEMBLE
1. Unplug the unit before cleaning.
2. Use a damp cloth to wipe down the outside of the compressor at least once each
month (or more if necessary).
3. Check the filter at least once each week. Replace the filter when dirty. Replacement filters
are available where you purchased this product (Package of 4: Part No. 929-4 or Package
of 50: Part No. 929-50).
4.To change the filter:
• Lift up the filter and remove it by twisting and pulling it straight up.
• The filter should be replaced when it becomes discolored. Do not wash or reuse the filter.
• When replacing the filter make sure it is fully inserted.
5. After each cleaning, check that the unit is working properly by verifying that air still comes
out of the nozzle when the unit is turned to the "on" position.
6.The unit is oil-free. Do not lubricate.
7. Service should only be performed by an authorized dealer. Unauthorized repair voids warranty.