Safety Instructions - Schneider Airsystems NZ-SYS Notice D'utilisation D'origine

Symbol Meaning
Explosion hazard!
2.3

Safety instructions

DANGER
Explosion hazard!
Do not work in potentially explosive areas!
Observe maximum pressure (see Instruc-
tion manual, Part 1, Chapter: "Technical
data")!
Use compressed air for energy only.
WARNING
Uncontrolled movement of compressed
air hose when quick-action coupling is
opened!
Hold the compressed air hose tightly!
WARNING
Sheared rivet pins may fall out during
overhead work!
Wear safety glasses!
WARNING
Dispersion of dust, fluids, dirt particles
during operation.
Wear safety glasses!
WARNING
Risk of injury:
Never direct a tool towards yourself, other
people or animals!
Symbol Meaning
Tripping hazard!
WARNING
For maintenance and repair tasks or
tool kit change:
Disconnect the compressed air connec-
tion!
Depressurise the unit!
CAUTION
Dangerous obstacle!
Air hoses laid on the ground.
Avoid or pay close attention.
NOTICE
Sparks can cause fires.
Some material machining methods gen-
erate sparks that can cause fires or
smouldering!
Avoid spark formation!
Make sure the unit is used for the
intended purpose!
NOTICE
When changing the carrier piece
(item 04):
Compressed air supply does not need dis-
connecting!
GB
NZ
II/ 7