Aqua Medic SP 3000 Mode D'emploi page 9

Drive wheel with rollers: The plastic drive wheel and the rollers are designed for a long life. Nevertheless, it
may become necessary to change it. The change can be done the following way: Remove the pump hose by
pushing the fittings out of the housing. The drive wheel can now be pulled off the shaft as it is a pressed fitting.
Motor: The motor has a lifetime of > 10,000 hours. To replace the motor, remove the drive wheel assembly.
Undo the 4 screws in the backplate. Now, remove the backplate and protection plate. Undo the power cable
connection from the connector block and remove 2 screws securing the motor to the housing. To fit the new
motor reverse the above process.
Safety instructions
The pump may only be used indoors. Before undertaking any work on the pump, disconnect the power plug
from the mains!
8. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period, we
will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of a
fault with the unit during or after the warranty period, please contact your dealer. All further steps are clarified
between the dealer and AB Aqua Medic. All complaints and returns that are not sent to us via specialist dealers
cannot be processed. AB Aqua Medic is not liable for consequential damages resulting from the use of any of our
products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
-Technical changes reserved – 03/2019
9