Blumfeldt Heat Hexa Mode D'emploi page 16

EN
16
OPERATION
Plug heater in, and push the On/Off switch. The red indicator is lit and the
heater is on standby. Press
settings:
Press 1x The indicator lights up blue and the heater heats at low setting.
Press 2x The heater heats at medium setting.
Press 3x The heater heats with high setting.
Press 4x The heater heats with high setting and the LED light is on.
Press 5x Only the LED light is on.
Press 6x The heater returns to standby mode. The indicator lights red.
Remote Control Functions
Plug heater in, and push rocker
power switch. The red indicator is
lit and the heater is on standby.
• With the (OFF) key, the device
can only be switched off.
• Press (800W) to select the
low power setting.
• Press (1200W) to select the
medium power setting.
• Press ( ) to turn the LED
light on or off.
• Press (800W) and (1200W)
consecutively to select the
high power setting.
repeatedly to select one of the following