Airelec PREMIER SAS Digital Manuel D'utilisation page 12

=English Version=
COMFORT TEMPERATURE SETTING:
Using the + and – button, you can increase or decrease the set
temperature by steps of 1°C.
You can set your own desired temperature.
Close the doors of the room and wait several hours until the
temperature stabilizes at the desired value.
If the set temperature does not suit you, increase or decrease the
value by steps of 1 °C.
Wait again a few hours to check the comfort temperature value.
Advise: We suggest you a reference temperature of 19 ° C.
Signals through the
Displayed symbols Operation
programmer
STOP Heating stops instantly
Set back of 3,5° C below the comfort
ECONOMY (Set back)
temperature
Holds temperature at ~7° C to avoid
ANTI-FROST
frost damage
ECONOMY OVERRIDE FACILITY:
For short-term absence (more than 2 hours), this mode helps you to
save energy and heating costs. This economic position will decrease
the room temperature by 3.5° C compared to the chosen comfort
temperature setting. To do this:
Press the MODE button until the display shows you the position "EC"
(see picture).
It is possible to check the Economic setting by briefly pressing one of the two buttons + or -.
To change the "EC" temperature: press for 3 seconds on MODE and "EC" flashes.
The modification is possible using the + or - buttons. Press the MODE button to validate.
« ANTI-FROST » MODE:
For long-term absence (more than 24 hours), this mode helps to maintain the room temperature at
about 7° C. This ensures maximum savings without taking the risk of
irreversible freezing damages.
To do this:
Press the MODE button until the display shows the position "HG"
(hors-gel i.e. Anti-Frost in French).
12