Airelec PREMIER SAS Digital Manuel D'utilisation page 10

IMPORTANT: « DO NOT COVER »
To avoid overheating, do not cover the heater in any circumstances.
The picture sticker « DO NOT COVER » reminds you of this risk.
It is strictly forbidden to cover or block the shades
or air outlets in order to avoid incidents or
deterioration of
installation close to windows or air outlets
(chimneys, ventilation), behind curtains or doors.
Please respect the minimum installation distances
to the floor, walls, furniture, etc ... (Picture B)
Remove the bracket of the appliance using a screwdriver (Item 1). Attach the bracket to the wall using 4
screws (Ø 5, 5 mm max.) ensuring the right direction and at the right height (Fig. C).
HORIZONTAL
The electrical installation must be equipped with an Omni polar
circuit breaker with a contact opening gap of at least 3 mm. The
power supply must be protected by a residual circuit breaker of not
more than 30mA, especially when installed in a bathroom. The
pilot wire (black) must never be connected to the earth
(yellow-green wire).
The electrical connection requires no disassembly. The device
should not be installed under a wall socket.
the device. Please
3. INSTALLATION AND WALL MOUNTING
model
AXLE BASE
H
B
C
4. ELECTRICAL CONNECTION
avoid
500 W 1000 W 1500 W
178 mm 248 mm 405 mm
257 mm 257 mm 257 mm
202 mm 145 mm 275 mm
270 mm 270 mm 270 mm
=English Version=
FIG.B
FIG.C
2000 W
524 mm
257 mm
270 mm
270 mm
10