Yamaha YAS-103 Mode D'emploi page 13

Playing back audio from a
sound bar
1
With the sound bar turned on, press the BLUETOOTH key on the
sound bar's remote control to select Bluetooth as the input source.
The BLUETOOTH indicator on the front panel lights up in green.
Lights up
2
Turn on the Bluetooth device.
When connection is made correctly, the BLUETOOTH indicator of the
sound bar flashes 3 times.
Flashes 3 times
3
Play back a song on the device.
NOTE
• Perform connection with the device and sound bar within 10 meters (33 ft) of each other.
• It may be necessary to select "YAS-103 Yamaha" in the
connection problem occurs. You may have to change the output setting to output audio to the sound bar,
depending on the device you are using.
• Adjust the volume level of the device as required.
• If a device is already connected to the sound bar, terminate that
connect with the new device.
Terminating connection
connection is terminated in the following cases. When the
connection is terminated, the BLUETOOTH indicator flashes once.
• The Bluetooth compatible device is turned off.
• The BLUETOOTH key on the sound bar's remote control is pressed for more than 3 seconds.
• The sound bar is turned off.
device on the Using the
The
that interlocked by the operation of the
How to set
With the sound bar turned on, hold down the BLUETOOTH STANDBY key
on the sound bar's remote control for more than 3 seconds.
Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the
mode between enabled and disabled.
When the
STATUS indicator lights up in red.
device list again, in the event that a
Using the HOME THEATER CONTROLLER application
connection, then
By installing the dedicated free application "HOME THEATER CONTROLLER" to a
conveniently with the
sound adjustments)
For details on "HOME THEATER CONTROLLER", see the product information on our
website.
standby mode
standby mode allows you to turn on (or off) the sound bar automatically,
standby mode is enabled and the sound bar is turned off, the
Lights up (red)
Functions available on Bluetooth devices with Bluetooth standby mode enabled
Power on interlock function (when the sound bar is turned off)
When connection is made on the device, the sound bar will turn on and will be ready to play
back sound from the device.
Power off interlock function (when the sound bar is turned on)
The sound bar will be turned off when
when BLUETOOTH is selected as the input source.)
device, such as a smartphone, you can perform various operations easily and
device. (Setting items: basic operation, sound-field,
device.
Flash 3 times (enabled), flash once (disabled)
connection is terminated on a device. (Only
11