5. Select Air Dryer function
1) Press
button to start the dryer, press
Note:
Dryer function will automatically stop after 5 minutes. Please push the button again to activate the
function.
6. Adjusting Air Dryer Temperature
1) Press
button to activate warm fan, repeat until preferred temperature is achieved.
2) There are three temperature levels: low<medium<high
3) The function displayed on the LCD :
7. Deodorizer function
1) In the auto mode (the LCD screen will display
MULTICLIN is occupied.
2) Press
for 3 seconds to switch between auto (default) <---> manual options
3) In the manual mode press
4) Deodorizer device will stop automatically after leaving the seat for 60 seconds.
8. Seat temperature adjustment
1) Press
to adjust the seat temperature. Repeat until preferred level is achieved
2) There are 4 temperature levels: OFF<Low<Medium<High
3) The function displayed on the LCD :
DO NOT inert fingers or any other objects into the intake fan.
The setting of water and seat temperature will take a few minutes to heat up.
Temperature settings are stored in memory according to the last settings.
In case of power supply shortage this settings will be reset.
OPERATION
Remote Control
button to stop the dryer.
Low
Medium
45˚ C
52˚ C
) the deodorization will start automatically once the
to activate/deactivate the deodorizer.
Off
Low
Medium
Room
35˚C
37.5˚C
temperature
High
59˚ C (±5°C)
High
40˚ C (±3°C)
11