Alcad GRF-411 Mode D'emploi page 13

P O R T E R O
Funcionamiento - Operation - Fonctionnement
Configure the entrance panel of the external entry point as the external panel
as the main panel
The function activating the electric lock from the entrance panels remains enabled at all times.
SYSTEM ON STANDBY
The telephones are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a telephone is
lifted, an uninterrupted tone will be heard.
SYSTEM ACTIVE.
Only the telephone whose code is the same as the code which has been entered or which is associated with the pushbutton which has been
pressed will receive the call. Confirmation of the call on the entrance panel The call tone will be different for calls made from the panel of the
external entry point and calls from the entrance panel of the buildingk of flats. If the handset of another telephone in the same buildingk is
picked up, intermittent tones will be heard. If the handset of the requested telephone is off the hook or if the code does not correspond to any
telephone, the panel will emit intermittent tones.
Time limit to answer the call: At the external entry point; configurable (Position 7 from the configuration menu). In buildings inside the estate;
consult datasheet of the audio unit.
Time limit for conversation: At the external entry point; configurable (Position 6 from the configuration menu). In buildings inside the estate;
consult datasheet of the audio unit.
During the answering and conversation periods, the panels of other buildingks remain on standby until a call is made. If the call is made from
the external entry point, the panel display will show the code which has been entered. The entrance panel of the buildingk where the telephone
is located remains deactivated (blocked).
D I G I TA L - D I G I TA L
.
D O O R E N T RY S Y S T E M S - P O R T I E R N U M É R I Q U E
Configure the entrance panel of each building