Philips HomeHero FC8912 Mode D'emploi page 12

English
12
adjusting suction power
1 During vacuum cleaning, you can adjust the suction power with the
selection wheel on top of the appliance.
- Use maximum suction (+) power to vacuum very dirty carpets and
hard floors.
- Use minimum suction power (-) to vacuum curtains, tablecloths etc.
2 Specific types only: You can also adjust the suction power with the
suction power slide on the handgrip.
storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the mains cord.
3 Specific types only: Always put the Tri-Active nozzle in the carpet
setting when you store it. This prevents the side brushes from
becoming bent.
4 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
To ensure stable storage of the telescopic tube, adjust the tube to the
shortest length.