Philips HomeHero FC8912 Mode D'emploi page 10

English
10
- The opening at the front of the nozzle allows you to suck up larger
particles.
1 Use the hard floor setting to clean hard floors (for instance tiled,
parqueted, laminated and linoleumed flooring): push the rocker
switch on top of the nozzle with your foot to make the brush strip
come out of the housing. At the same time, the wheel is lifted to
prevent scratching and to increase manoeuvrability.
2 Use the carpet setting to clean carpets: push the rocker switch again
to make the brush strip disappear into the nozzle housing. The wheel
is lowered automatically.
Combination nozzle (specific types only)
The combination nozzle can be used on either carpets or hard floors.
1 To clean hard floors, push the rocker switch on top of the nozzle
with your foot.
The brush strip for cleaning hard floors comes out of the nozzle
,
housing.
2 To clean carpets, push the rocker switch again.
The brush strip disappears into the nozzle housing.
,