Detections Functions; Open Window / Closed Window; Occupation - Thermor Émotion 3 Notice D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

Before any action, turn the screen on by pressing any button .

Open Window / Closed Window

Detect temperature changes associated with opening and closing your windows .

If you forget to turn your device off when a window is open for an extended period of time, this

function will solves this problem and prevent unnecessary heating from your device .

The device will automatically change to Frost Free (7°C), when it de-

tects an open window and will restart at the set temperature, when

it detects that it is closed .

Your device reacts to opening and closing of windows, in accordance

with several variables, including in particular:

- the desired temperature in the room,

- external temperature,

- configuration of your installation (the location of your device in relation

to the window) .

We do not recommend the use of the Airing function in corridors and rooms located close to an

entrance door from outside your home or from the garage .

Enabling / Disabling the function

If devices are connected together, you can disable Open window detection on a single device

without disabling the other (see "Settings" in the "Expert Menu") .

Occupation

Enables heating of the room only when a person is present . The device applies the recorded set

temperature . The detection is not done below the sensor .

Enabling / Disabling the function

The function is always enabled when in AUTO MODE

Ex : Your device is set to 19° C, in Comfort mode (whether programme or not)

- 9:00, it detects your absence ;

- 9:30, its operating instructions are set to 18° C ;

- 10:00, its operating instructions are set to 17° C .