Elipson PF 6B Manuel D'utilisation page 31

EN
2. Connections on Home-Cinema amplifier and Home-cinema preamplifier
It is essential to connect the speakers using the correct polarity. Make sure to connect the
" + " terminal of the speaker (Red) to the " + " output terminal of the amplifier. Then, make
sure to connect the " - " terminal of the speaker (Black) to the " - " output terminal of the
amplifier. A wrong connection would cause a cribled stereo image and loss of bass. Use
high quality speaker cable. Elipson speakers are supplied configured for use in a single
wired mode or bi-wiring. Bi-amp is also possible (see page 31).
•SW
SUB8
or
SUB10*
Speaker Enter
•FR/FL FRONT RIGHT/LEFT
•C CENTER
•SR/SL SURROUND RIGHT/LEFT
•SBR/SBL SURROUND BACK RIGHT/LEFT
•SW SUBWOOFER
•FHL/FHR HEIGTH RIGHT/LEFT
*Depending your model
ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.
FRONT FRONT CENTER
R L
•FR •FL •C
24F 24F 11C
or or or
14F* 14F* 14C*
or or or
34F* 34F* 14LCR*
or or
14LCR* 14LCR*
PRE OUT PRE OUT
SUBWOOFER SUBWOOFER
RCA SUB RCA SUB
SPEAKERS SPEAKERS
SURROUND SURROUND SURROUND
R L BACK R
•SR •SL •SBR
7SR 7SR 7SR
or or or
14LCR* 14LCR* 14LCR*
•SBR
6B
or
8B*
Description
Speaker Front right (R) /Left (L)
Central Speaker
Surround speaker right (R) /Left (L)
Surround back speaker right (R) /Left (L)
Subwoofer
Atmos speaker Front right (R) /Left (L)
30
SURROUND HEIGHT HEIGHT
BACK L R L
•SBL •FHR •FHL
7SR 6ATM 6ATM
or
14LCR*
•SBL
6B
or
8B*