gdw 0473 Mode D'emploi page 5

Mercedes Sprinter
1995 - 1998
Ref. 0473
Fitting instructions
1) Remove the spare wheel. Permanently remove the towing ring at the right underside of the vehicle.
2) Place the tow bar with points (A) against the inside of the chassis beams matching the provided holes.
Point (B) comes against the underside of the transverse beam matching the provided screw-thread holes.
On the outside of the chassis beams on point (A), place the mounting pieces (e) and insert the bolts and
washers.
At point (B), screw in the bolts with washers.
3) Assemble (*) and the security shackle and tighten everything firmly.
4) Replace the spare wheel.
Composition
1 tow bar reference 0473
1 flange-ball 50T
2 bolts M16x50
2 security washers M16
2 nuts M16
1 security shackle 50T
8 bolts M12x90
8 security washers M12
8 nut M12
4 bolts M10x30
4 security washers M10
4 washers 30x10,5x2,5
2 mounting pieces (e)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(A)
(B)
(B)
(B)
(A)
All bolts and nuts : quality 8.8