Brewing Drinks - Philips 2200 Série Mode D'emploi

English
8
4. Setting the water hardness
To change the water hardness settings, you can use the machine settings menu in the Coffee + app,
or can you find step-by-step instructions in this user manual (see 'Setting the water hardness ').
1 sec.
5. Assembling LatteGo (specific types only)
6. Assembling the classic milk frother (specific types only)
1
2

Brewing drinks

General steps
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 Press the on/off button, use the Coffee + app or Alexa voice control to switch on the machine.
- The machine starts heating up and performs the automatic rinsing cycle. During heating up, the
lights in the drinks icons light up and go out slowly one by one.
- When all lights in the drink icons light up continuously, the machine is ready for use.
3 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down to
adjust its height to the size of the cup or glass you are using (Fig. 1).
Personalizing drinks
This machine allows you to adjust the settings of a drink to your own preference. After selecting a
drink you can:
1 Adjust the aroma strength by tapping the aroma strength icon (Fig. 2). There are 3 strengths, the
lowest is the mildest and the highest is the strongest.
2 Adjust the drink quantity by tapping the drink quantity (Fig. 3) and/or the milk quantity icon
(specific types only). There are 3 quantities: low, medium and high.
You can also adjust the coffee temperature to your own preference (see 'Adjusting the coffee
temperature').
1 min.
CLICK