Philips 2200 Série Mode D'emploi page 14

English
14
- Respectively 1, 2 or 3 lights are on.
4 When you have finished setting the coffee temperature, press the start/stop
5 Press the on/off button to switch on the machine again.
If you do not switch off the machine yourself, it will switch off automatically after some time.
Restoring factory settings
The machine offers you the possibility to restore the default drinks settings and the Wi-Fi settings at
any moment.
You can only restore the default settings when the machine is switched off.
If you reset the machine, it is disconnected from your home Wi-Fi and is no longer paired with your
smartphone or tablet and Alexa device. To reconnect, follow the instructions in section 'Resetting all
network settings and connections '.
1 Switch off the machine.
2 Press and hold the espresso icon until the start/stop
3 Press the start/stop
4 Navigate in the app to machine settings and remove the machine from the app.
After a reset, it can take at least five minutes before the machine is able to perform the Wi-Fi set up
again.
Adjusting grinder settings
You can change the coffee strength with the grind setting knob inside the bean container. The lower
the grind setting, the finer the coffee beans are ground and the stronger the coffee. There are 12
different grind settings you can choose from.
The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you
not to adjust the grind setting until you have brewed 100-150 cups (approx. 1 month of use).
You can only adjust the grind settings when the machine is grinding coffee beans. You need to
brew 2 to 3 drinks before you can taste the full difference.
Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the coffee bean hopper.
3 Tap the espresso icon and then press the start/stop
4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right.
(Fig. 19)
Deactivate the beeps of the control panel
1 Press the on/off button to switch off the machine.
2 When the machine is switched off, tap and hold the coffee icon (espresso lungo icon for EP3221)
until the light in the icon goes on. The start light starts flashing.
3 Tap the coffee icon again to deactivate the beeps of the control panel. The light in the coffee icon
goes out.
4 Press the start/stop button to confirm your choice.
button to confirm you want to restore the settings.
button starts flashing.
button.
button.