Flex DW 45 18.0-EC Notice D'instruction D'origine page 25

DW 45 18.0-EC
Turn dial to adjust screw-in depth.

Setting direction of rotation
CAUTION!
Do not change direction of rotation until the
power tool is at a standstill.
Set switch for selecting direction of

rotation to the required position:
– Left: counter-clockwise
(loosening screws)
– Right: clockwise
(inserting screws)
Switching on the power tool
Switching on without locking
Press and hold down the switch.

The electric power tool switch enables the
speed to be increased slowly to the
maximum value.
Switching off the electric power tool:
Release the switch.

Switching on with locking
Press and hold down the switch (1.).

Press locking button to lock the switch (2.).

Switching off the electric power tool:
Press and release the switch.

Work light
Press switch to activate and deactivate.

25