Flex DW 45 18.0-EC Notice D'instruction D'origine page 17

DW 45 18.0-EC
Intended use
The cordless dry wall screwdriver is
DW 45 18.0-EC is designed
– for commercial use in industry and trade,
– for screwing drywalls, chipboard or
fibreboard onto wood or metal using
drywall screws,
– for screwing sheet metal or wood screws
into interior fittings,
– to be used with suitable tools recommen-
ded by the manufacturer for this power
tool.
The screw magazine M-DW is designed for
the quick insertion of drilling screws,
chipboard screws and wood construction
screws.
The screw magazine may be used only in
conjunction with the following battery dry wall
screwdrivers:
– DW 45 18.0-EC
Safety instructions for cordless dry
wall screwdrivers and screw
magazines
WARNING!
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
Hold power tool by insulated gripping

surfaces only, when performing an
operation where the cutting accessory
may contact hidden wiring.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the
power tool "live" and shock the operator.
Hold the electric power tool securely.

When tightening and loosening screws,
high reaction torques may occur briefly.
Secure the workpiece.

A workpiece is held more securely in a
clamping device or vice than by hand.
Wait until the electric power tool has

come to a standstill before putting it
down. The insertion tool may jam and
cause you to lose control of the electric
power tool.
Wear suitable clothing. Do not wear any

loose clothing or jewellery. Keep hair,
clothing and gloves away from moving
parts.
Loose clothing, jewellery or long hair may
become caught in moving parts.
Do not point the electric power tool at

yourself or at other people nearby.
While working, do not reach into the

screw magazine or touch the area where
screws are being inserted.
There is a risk of injury from crushing or
sharp-edged screws.
Use only suitable screw belts according

to the section "Technical Data".
If other screws are used, the screw
magazine may be damaged.
Safety instructions for handling
batteries
Do not open the battery.

There is a risk of a short-circuit.
Protect the battery from heat, e.g. from

continuous exposure to sunlight, fire, water
and humidity.
There is a risk of explosion.
A damaged or incorrectly used battery may

result in the emission of fumes. Ensure
a supply of fresh air and consult a doctor in
the event of any physical complications.
The fumes may irritate the respiratory
tracts.
Liquid may leak out of the battery if the

battery is incorrectly used. Avoid contact
with such liquid. If contact accidentally
occurs, rinse with water. If liquid contacts
eyes, seek medical attention. Liquid
leaking from the battery may cause
irritation or burns.
Recharge batteries only with chargers

recommended by the manufacturer.
A charger that is suitable for one type of
battery may create a fire hazard when used
with another battery.
The battery may be damaged by pointed

objects such as e.g. nails or screwdrivers
or by external application of force. This
may give rise to an internal short circuit,
causing the battery to burn, smoke,
explode or overheat.
17