DW 45 18.0-EC
Push coupling towards rear (1.).
Insert screwdriver bit into the bit holder (2.).
Release coupling.
Stop sleeve
Attach stop sleeve to drywall
screwdriver.
Remove stop sleeve from drywall
screwdriver.
NOTE!
The stop sleeve is not required to loosen
screws.
Screw magazine
WARNING!
Remove the battery before carrying out any
work on the power tool.
CAUTION!
Before performing any work on the electric
power tool, move the lever for selecting
direction of rotation (3) to the middle
position.
Push coupling towards rear (1.).
Insert screwdriver bit into the bit holder (2.).
Release coupling.
Attach the screw magazine:
Press lock button and insert carriage into
guide.
Attach screw magazine to drywall
screwdriver.
Remove the screw magazine:
Press lock button and pull out carriage.
23