Dörr DSL-224 LED Notice D'utilisation page 7

CAUTION
To avoid tilting of the LED light, align the Strip Light over a widely spread tripod leg.
Make sure that the light stand stands on an even and dry ground.
NOTE Light stands are optionally available from DÖRR in specialist stores.
05 | FIRST USE/OPERATION
CAUTION
Before connecting or disconnecting cable connections, make sure that the Strip Light is
switched o (main switch (3) on position O = o ).
05.1 POWER CONNECTION
Insert the connection plug of the AC power adapter (9) into the socket (5) of the Strip
Light.
To hold the cable in place screw the screw lock (9a) upward.
Before disconnecting the cable, please make sure to unscrew the screw lock (9a) fi rst.
Insert the power cable (11) into the socket (10) of AC power adapter and connect with a
main supply. The LED indicator (8) lights up
05.2 OPERATION OF STRIP LIGHT
Turn on the Strip Light at the main switch (3, position I = ON).
•
To adjust the brightness, turn the brightness control (4).
•
With the barn doors you can place the light in the desired direction.
•
CAUTION
Never leave the Strip Light unattended while operation.
•
The housing and the barndoors heat up slightly during operation - turn off the LED light
•
after use and allow it to cool down before touching the housing or the barndoors, or
before stowing the device in the bag.
After use, please switch off the Strip Light at the main switch (3, position O = Off) and
•
disconnect from main power.
.
GREEN
06 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a
soft, slightly damp microfi ber cloth to clean the outer parts of the device. Make sure to
take o the device from power before cleaning! Store the device in a dust-free, dry and
cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
07 | TECHNICAL SPECIFICATIONS
Number of LEDs
Colour temperature
Power
Beam angle
Colour rendering index (CRI)
Illuminance approx.
Operating voltage
Operation with
Dimensions housing approx.
Dimensions illuminated area approx.
Weight Strip Light approx.
Weight incl. accessories and bag approx.
08 | SCOPE OF DELIVERY
1 Strip Light DSL-224
1 AC power adapter
1 Goose neck
1 Ball head
1 Bag
1 Safety hints
09 | DISPOSAL, CE MARKING
09.1 DISPOSAL, CE MARKING
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is
the European community directive on waste electrical and electronic equip-
ment, which became European law in February 2003. The main purpose of this
directive is to prevent electronic waste. Recycling and other forms of waste
recovery should be encouraged to reduce waste. The symbol (trash can) on
the product and on the packing means that used electrical and electronic pro-
ducts should not be disposed of with general household waste. It is your res-
ponsibility to dispose of all your electronic or electrical waste at designated
collection points. Disposing of this product correctly will help to save valua-
ble resources and it is a signifi cant contribution to protect our environment
as well as human health. For more information about the correct disposal of
electrical and electronic equipment, recycling and collection points please
contact your local authorities, waste management companies, your retailer
or the manufacturer of this device.
09.2 ROHS CONFORMITY
This product is compliant with the European directive 2011/65/EU of June 08,
2011 for the restriction of use of certain hazardous substances in electrical
and electronic equipment (RoHS) and its amendments.
09.3 CE MARKING
The CE marking complies with the European directives.
7
224, white
max. 5500 ± 200 K
55 W
90°
≥95 R
a
1,0 m: 1000 Lux
DC 15 V 4 A
Power adapter AC 100 ~ 240 V 50/60 Hz
(included)
850 x 85 x 60 mm
780 x 65 mm
1610 g
3050 g