5
ca. 20 mm
6
7
≤ 3 min.
> 3 m in.
54
Remove the cap and plug from the
Endo-Fix cartridge and set aside.
Attach the mixing nozzle and cap.
Squeeze until content comes out evenly
(approx. 150 mm long strand).
Precautionary measure:
The small piston of the cartridge could
get stuck - push gently to loosen it
before inserting it into the cartridge
applicator gun.
Use the mixing nozzle to inject the
Endo-Fix injection compound through
the sealing plugs. Gauge the strokes of
the injection gun when filling for the
first time – the cavity is filled in when
some of the injection gently flows back.
The compound takes 3 minutes to dry.
After 3 minutes of not using the mixing
device, the mixing nozzle has to be
replaced.
6
3
5