Clatronic DBC 2899 Mode D'emploi & Garantie page 34

Spray Function
GB
If you wish to moisten an area which is to be ironed, press the spray button (6).
Self-Cleaning (Self-Clean)
1. Half fi ll the water tank with water.
2. Heat the machine up to its maximum temperature. After the control lamp goes
off remove the machine from the mains supply.
3. Now hold the iron horizontally over a sink. Hold the steam control in the
„SELF CLEAN" position. Now rock the device backwards and forwards until
the tank is empty. The steam control automatically returns to position b.
4. Place the machine back on its stand and heat it up again. To clean the base
now iron over a clean cotton cloth.
Functions of the base
Position of the function switch
Turned fully to the left
Turned fully to the right
Central position
Attachment
Use the contrivance in the base to attach the iron to a table top. See also illustra-
tions A to D.
Cleaning and Storage
• Always remove the mains lead before cleaning!
• Clean the casing with a slightly damp cloth.
• Clean the iron with a slightly humid cloth.
• Always return the steam regulator to the „b" position after use and empty the
water tank in order to prevent any leaks.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
34
6....-05-DBC 2899 34
Function
Ironing with cable
Ironing without cable
Locked in position. The iron can no longer
be removed from the base.
29.09.2004, 11:24:20 Uhr