Table des Matières
Publicité
frame shows which face has been
selected when auto-focus is used.
Focus is set to the face closest to the
camera.
To set face detection
1
Activate the camera and press
select
.
2
Select
>
Focus
>
Smile Shutter™
Smile Shutter allows you to capture the
smiles of family and friends. The
camera detects up to three faces and
selects one face for smile detection
and auto focus. A yellow frame shows
which face is selected. When the
selected face smiles, the camera
automatically takes a photo.
To set Smile Shutter™
1
Activate the camera and press
select
.
2
Select
>
Shoot mode
Shutter™.
3
When
appears, the camera is in
Smile Shutter mode.
To use Smile Shutter™
1
Activate the camera and press
select
.
to
Face
detection.
to
>
Smile
to
2
When you see the yellow frame, press
fully down. When
detection is activated.
3
The camera automatically takes the
photo when the subject smiles.
4
To take a photo although no smile is
detected, press
BestPic™
You can take a series of photos with
one press of the camera key. Then you
can save the best photo, or all of them.
To use BestPic™
1
Activate the camera and press
select
.
2
Select
>
Shoot mode
3
Press
halfway down to use auto
focus.
4
When the dot and focus frame are
green, press
fully down to complete
the shot.
5
Select
Options
>
Save all
navigation key left or right to choose
the best photo and select Save.
Red-eye reduction
Reduce the red-eye effect by making
the flash fire before the shot is taken
and again during the shot.
Cyber-shot™
appears, smile
fully down again.
to
> BestPic™.
or press the
27
Publicité
Table des Matières
