EN
User guide
2000 kg ratchet locking jack stands
SAVE THESE INSTRUCTIONS !
For your safety, read, understand, and follow the information
provided with and on this jack stand. The owner and operator of this equipment must have an understanding
of this jack stand and safe operating procedures before attempting to use. The owner and operator must be
aware that use of this product may require special skills and knowledge. Instructions and safety information
must be conveyed in the operator's native language before use of this jack stand is authorized. If any doubt
exists as to the safe and proper use of this jack stand, remove from service immediately. Inspect before
each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any jack
stand that appears damaged in any way, operates abnormally or is missing parts, must be removed from
service immediately. If the jack stand has been, or suspected to have been, subjected to a shock load (a
load dropped suddenly, unexpectedly upon it), immediately discontinue use and remove from service. It
is recommended that an annual inspection be done by qualified personnel. Labels and Owner Manuals are
available by contacting the consumer enquiries helpline number at the end of this manual.
PRODUCT DESCRIPTION
Michelin Ratchet Locking Jack Stands are designed to safely support level, rated capacity loads, specifically
vehicles, for extended periods. Stamped steel construction and ductile iron ratchet bars ensure safety,
strength and stability.
TECHNICAL SPECIFICATIONS
Maximum load : 2000 kg - Minimum height : 280 mm - Maximum height : 408 mm
BEFORE USE
1. Verify that the product and the application are compatible.
2. Before using this product, read the owners manual completely and familiarize yourself thoroughly with
the product, its components and recognize the hazards associated with its use.
3. Always check the vehicle owners or service manual for location of proper lift and support points.
5