Bosch PLL 5 Notice Originale page 22

OBJ_BUCH-311-008.book Page 22 Wednesday, April 27, 2016 9:57 AM
22 | English
– Fastening with Adhesive Tape (see figure H): The wall holder can
also be fastened with commercially available adhesive tape (not
included in the delivery scope) as shown in the figure.
In all three mounting methods, ensure that the wall holder 1 is securely
attached to the surface. The wall holder slipping out of position can lead
to incorrect measurements.
Attach the measuring tool via the magnets 13 onto the metal plate 3 of the
wall holder 1.
Belt Clip
With the belt clip 4, the measuring tool, as an example, can be hooked to
a belt and is always at hand.
Maintenance and Service
Maintenance and Cleaning
 Check the measuring tool each time before use. In case of visible
damage or loose components inside the measuring tool, safe function
can no longer be ensured.
Keep the measuring tool clean and dry at all times to ensure proper and
safe working.
Wipe off debris using a moist and soft cloth. Do not use any cleaning
agents or solvents.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning
our products and their accessories.
In all correspondence and spare parts orders, please always include the
10-digit article number given on the nameplate of the product.
1 609 92A 2TP | (27.4.16) Bosch Power Tools