Bosch PLL 5 Notice Originale page 19

OBJ_BUCH-311-008.book Page 19 Wednesday, April 27, 2016 9:57 AM
Technical Data
Line laser
Article number
Working range to approx.*
Levelling Accuracy**
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Batteries
Weight according to
EPTA-Procedure 01:2014
Dimensions
* when using the wall holder 1; under unfavourable conditions such as intense sun irra-
diation, the working range is smaller
** when the measuring tool is positioned correctly (see "Positioning the Measuring Tool
(see figure B)", page 20)
The measuring tool can be clearly identified with the serial number 14 on the type plate.
Assembly
Inserting/Replacing the Batteries (see figure A)
Alkali-manganese batteries are recommended for the measuring tool.
To open the battery lid 10, press the latch 9 in the direction of the arrow
and remove the battery lid.
Place the battery-recovery ribbon under the first battery being inserted.
Insert the supplied batteries in the sequence shown in the figure, paying
attention to the correct polarity.
Always replace all batteries at the same time. Only use batteries from one
brand and with the identical capacity.
 Remove the batteries from the measuring tool when not using it
for extended periods. When storing for extended periods, the batter-
ies can corrode and self-discharge.
Bosch Power Tools
English | 19
PLL 5
3 603 K15 000
5 m
±1 mm/m
+5 °C...+40 °C
–20 °C...+70 °C
90 %
2
635 nm, <2 mW
2
2 x 1.5 V LR03 (AAA)
0.12 kg
142 x 27 x 30 mm
1 609 92A 2TP | (27.4.16)