Element And Control Setting; Single Radiant Element; Dual Radiant Element - Haier HCC2320AES Guide De L'utilisateur

ELEMENT AND CONTROL SETTING

Turn off all controls when done cooking.
Failure to do so can result in death or re.

SINGLE RADIANT ELEMENT

This type of electric element uses a wire ribbon located under the glass surface
to provide the heat for cooking. The elements will cycle on and off by their own
temperature limiters.
Temperature limiters
Each radiant burner has its own sensor to protect the glass cooking surface from
extreme high temperatures. The limiter will operate automatically by cycling the
element through the cycles as defined by knob setting (HI-LO).

DUAL RADIANT ELEMENT

The dual element consists of two radiant ribbon elements within the same heating
area. Either the small (inner element) or both (inner and outer) elements may be
selected for use. There are an infinite number of heat settings between the LO and
HI position. Fixed positions are found at LO and HI to define minimum and maximum
heat setting.
To turn ON the inner element, push down on the control knob and turn it
counterclockwise following the single line graphics.
To turn ON both inner and outer elements together, push down on the control
knob and turn clockwise following the double graphics line.
WARNING
Fire Hazard
7