Parrot SEQUOIA Guide Utilisateur page 23

is still on the latest photos may be corrupted.
LED properties
Multispectral sensor
Start up
When you turn on Sequoia the LED has the following properties:
Other
General
Quick flashing orange
Slow flashing orange
Flashing blue
Problem
Continuous red
Flashing red
Flashing yellow
Calibration of the magnetometer
Steady purple
Flashing purple
Flashing green
Flashing blue
The sensor is ready to take a
photo.
The sensor needs to be
calibrated.
Shutting down
Update in progress
Enabling/Disabling Wi-Fi
Hardware malfunction
Corrupted memory. Repair in progress.
Once the repair is complete the LED
reverts to green. This operation may take
several seconds depending on the space
available on your SD card.
Memory full
The sensor must be stationary for 1
second
The sensor needs to be calibrated
Calibration in progress (pitch axis)
Calibration in progress (roll axis)
23