Updating Sequoia - Parrot SEQUOIA Guide Utilisateur

GPS/GNSS
Continuous yellow
Continuous green
There are two ways to update Sequoia.
Via USB
To update Sequoia via USB you must use a micro USB OTG cable male
plug with a USB female socket (Diagram H).
1. Connect your USB drive to a computer and make sure that it contains
no files in .plf format.
2. Go to the Sequoia help page: www.parrot.com/uk/support/
3. Download the update file available in .plf format.
4. Copy the file to the root directory on your USB key without putting
it in a folder or renaming it.
5. Connect your micro USB OTG cable to the USB host port on the
multispectral sensor.
6. Connect the USB key containing the update file to the other end
of the cable.
7. Turn on Sequoia.
> The update runs automatically. During the update the multispec-
tral sensor light flashes orange (diagram I). Once the update is
complete the light turns green.
GPS /GNSS connection not established
GPS /GNSS connection established

UPDATING SEQUOIA

Diagram H
Diagram I
25