Adjusting The Air Nozzles; Setting The Timer - Dometic FRESHLIGHT FL 1600 Notice D'utilisation

FreshLight
9.8

Adjusting the air nozzles

The air supply within the vehicle can be regulated by setting the air nozzles.
The air nozzles can be regulated with a slide button (fig. 5 2, page 5) so that air is
directed to the front, the back or in both directions:
➤ Turn the knob on the slider anti-
➤ Move the slider so that the air is directed in the required direction.
➤ Tighten the knob again in
The slats (fig. 5 1, page 5) in the front air nozzle can be moved. This directs the air
in the required direction.
9.9

Setting the timer

The timer function allows you to set a specific time period for air conditioning. You
can specify the switch-on time, the switch-off time or both values.
I
NOTE
The remote control returns to its initial mode if no button is pressed on
the remote control for 15 seconds while programming the timer.
➤ Before programming the timer, select the air conditioning mode and all required
values (e.g. temperature).
Setting the switch-on time
➤ Press the
button once.
✓ The ON symbol (
➤ Use the + or – button to set the time when the roof air conditioner is to switch on.
➤ Press the SET button to transmit the value to the roof air conditioner.
✓ The switch-on time is set on the roof air conditioner.
The roof air conditioner is switched on with the selected air conditioning mode
at the specified time.
➤ Switch the roof air conditioner to stand-by.
EN
wise.
clock
wise direction.
clock
) flashes on the display of the remote control.
Operating the roof air conditioner
27