Suggestions Before Measuring; Menu Setting & Functions; Main Functions; Choice Of Temperature Unit - VISIOMED Bewell Connect MyThermo Pocket Mode D'emploi

- Before any new temperature measurement, wait for the screen to turn
off.
- It is advisable, with each change of environment with a significant
difference in ambient temperature, leave the MyThermo Pocket at this
ambient temperature for at least 30 minutes before use. It is important
to wait a period of 1 minute between measurements. If the person
come from the different ambient temperature than the unit, please stay
at least 5 minutes before taking temperature.

5. SUGGESTIONS BEFORE MEASURING

1. The measurement should be taken at rest, to yield accurate results.
Body temperature is likely to increase just after exercise or after a bath.
2. Before taking a temperature, in order to obtain a stable, reliable result:
- Make sure to brush away the hair.
- Wipe off sweat.
- Avoid air flows (e.g. supplemental oxygen, air conditioning, etc.).
- Wait a period of 1 minute between each measurements.
6. MENU SETTING & FUNCTIONS

6.1. MAIN FUNCTIONS

1. Display of the temperature reading in degrees Celsius or Fahrenheit:
Temperature range from 30C° to 43C° (86°F to 109.4°F).
2. Memorization of the last 10 readings taken.
3. Audible alarm during temperature measurement based on the result.

6.2. CHOICE OF TEMPERATURE UNIT

Open the battery cover, press the C°/°F button to select the temperature
unit. The display shows C° to display degrees Celsius, °F to display
degrees of Fahrenheit.
BewellConnect - BW-MTX1 - User Manual - 2018-06_V1
- Check the unit for any damage in appearance, and
check the LCD screen full display as below picture. Do
not use the unit if any abnormality and contact your
retailer. If battery capacity is low, follow the instruction
to change to a new battery.
25