Method Of Operation And Use; Transport And Storage - Festo SLTE-10 Série Notice D'utilisation

SLTE−...
2

Method of operation and use

The electric mini slide type SLTE−... is a non−rotating spindle drive with roll barrel
guide and integrated motor unit.
The rotary movement of the motor converts a sliding thread drive (rotating spindle
with spindle nut on SLTE−...−LS−...) internally into a linear movement. The sliding
thread drive moves the drive rod backwards and forwards. By means of a rigid
connection, the slide also moves. The brushgear DC motor with encoder supplies
signals to the higher−order controller. The encoder signals transmit the rotary angle
of the motor to the controller type SFC−DC−... . The controller, which operates in a
closed−loop circuit, regulates the current, speed and position of the motor to the
specified nominal values with a high degree of accuracy.
The electric mini slide type SLTE−... has been designed to be used in conjunction
with controller type SFC−DC−... for the space−saving transport of mass loads with a
high degree of positioning accuracy. It is not permitted for use in yoke mode or for
manufacturing processes which are sensitive to copper or PTFE.
3

Transport and storage

Take the weight of the SLTE−... into
S
consideration.
Depending on the design, the SLTE−...
weighs over 2.2 kg.
Ensure storage conditions as follows:
S
short storage times and
cool, dry, shaded corrosion−protected
storage locations.
Festo SLTE−... 0501NH English
Fig. 2
23