Reading Snap* Tests; Full Read - Idexx SNAPshot DSR Reader Manuel D'utilisation

Reading SNAP* Tests

Full Read

Full Read lets you record the test lot ID, tech ID, and sample ID, and it
provides on-screen and printed test results. Use the Full Read mode if
you are testing under NCIMS guidelines. For guidelines, please refer to
New SNAP* Beta-Lactam 2400 Form (Appendix N), available in the
Regulatory section of the Resource Library at idexx.com/dairy.
To perform a Full Read:
1. On the Main screen, tap the Read Test button to access the Select
Test screen.
2. Tap the Full Read button. Depending on the type of SNAP test you
are reading, tap the Beta-Lactam, Other, or 3-Spot button.
The next screen requires you to enter the lot ID, the tech ID, and the
sample ID.
3. A screen appears that requires you to enter the lot ID, the tech
ID and the sample ID. Tap the Lot ID text field to access the numeric
keypad.
4. Tap the desired numbers. The numbers you enter appear in the Lot
ID text field at the top of the screen for verification. When finished,
tap OK.
TIP: Tap the Back arrow to clear the digits one by one. Tap the
Back button to clear all entries and close the keypad screen.
5. Repeat this process for the Tech ID and Sample ID fields and then
tap OK.
NOTE: All fields must be filled in before a test can be read.
6. Insert the activated SNAP device firmly and completely into the
SNAPshot* DSR Reader port.
NOTE: Keep the device in the SNAPshot DSR Reader until the red
LED light turns off.
After the test has been read, the screen displays the test type, time,
date, lot ID, tech ID, sample ID, results ratio, and negative or positive
result. This information is also printed.
Note: A results ratio of ≤1.05 is negative; a ratio of ≥1.06 is positive.
7. To read another test, tap the Next button. The test screen appears,
prefilled with the lot ID and the tech ID that you entered for the
previous test. Tap the Sample ID text field to enter the number for the
new test.
If you are done reading tests, tap Back to return to the Select Test
screen.
Figure 13: Select Test—Full Read
Figure 14: IDs
Figure 15: Insert SNAP
Figure 16: Full Results
IDEXX SNAPshot* DSR Reader Operator's Guide 9