Sony DPP-EX7 Mode D'emploi page 78

Using your printer with Macintosh computers
8
Remove the supplied CD-ROM from the CD-ROM drive of your
computer.
Notes
• If you cancel the installation midway, do the installation procedures from the step 4.
• If the installation fails, remove the printer from your computer, restart your
computer, and then do the installation procedures from the step 4
• The supplied CD-ROM will be required when you re-install or uninstall the printer
driver. Keep it in good order for possible future use.
Uninstalling the printer driver
When the software becomes unnecessary, remove the software as follows: In
step 6, click "Uninstaller".
When using Mac OS X (v10.1/v10.2)
1
Make sure that the printer is not connected to the computer.
2
Turn on and start your Macintosh.
Note
Be sure to close all running programs before installing the software.
3
Insert the supplied CD-ROM into the CD-ROM drive of your
computer.
4
Double-click the "Mac OS X
v10.1-10.2" folder.
5
Double-click
"DPPEX5_EX7.pkg".
78 GB