Publicité
Les langues disponibles
Les langues disponibles
MIG/MAG ROBO welding torch
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.
2.5 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electrical power supply
• Coolant supply
• Compressed air supply
• Gas supply
Further measures can be found in the "Power source" operating instructions or the documents
for further peripheral devices.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.
3.1 Technical data
Ambient temperature
Relative humidity
Tab. 1
Storage in a closed environment,
ambient temperature
Ambient temperature for shipment
Relative humidity
Tab. 2
BAL.0046 • 2019-02-07
Ambient conditions during operation
Ambient conditions for shipment and storage
3 Product description
-25°C to +55°C
Up to 90% at 20°C
-25°C to +55°C
-25°C to +55°C
Up to 90% at 20°C
EN - 5
Publicité
