Introduction / Scope Of Supply - BEHA UNITEST CHB 3 Mode D'emploi

The instruction manual contains information and ref-
erences, necessary for safe operation and mainte-
nance of the instrument.
Prior to using the instrument (commissioning / assembly)
the user is kindly requested to thoroughly read the in-
struction manual and comply with it in all sections.
Failure to read the instruction manual or to comply with
the warnings and references contained herein can re-
sult in serious bodily injury or instrument damage
1.0

Introduction / Scope of Supply

The UNITEST CHB 3 is a universal, multi-purpose electrical
measuring instrument. It comply with the standards DIN
VDE 0411 and EN 61010, and provide safe, reliable opera-
tion. The clamp meter is a valuable tool for all sorts of meas-
urements in both trade and industry.
3 /4
• 3 digit liquid-crystal display
• manual range selection for current, voltage, resistance
measurements
• Clamp opening 30 mm
• Switches off automatically
• Integral memory for readings
• Evaluates MIN/MAX values
• Zero-setting
• relative value function
The UNITEST Clamp Meter CHB 3 is supplied complete with
leads. After unpacking, check that the instrument is com-
plete, and that all accessories are present.
Scope of supply:
1 pce. UNITEST Clamp Meter CHB3
2 pce. test leads with probes (red/black)
2 pce. battery 1,5V IEC LR6
1 pce. holster
1 pce. Instruction Manual
Further accessories, such as test leads, probes, connectors,
etc., are listed in the UNITEST catalogue.
Introduction
17