Reer Neo 200 Notice D'utilisation page 9

Status LED Baby unit
The status LED above the on/off switch indicates the status of the baby unit.
Status LED Power Status
green on device is switched on
Status LED parent unit
The status LED above the on/off switch shows the status of the parent unit.
Status LED Power Status
green on device is switched on
orange flashing on noise is being received from the baby unit
red flashing on batteries are depleted
+ alarm tone
Battery operation of the parent unit
IMPORTANT: Switch the units off and disconnect the power lead before changing the batteries.
1 2
16
3
The reception range depends on the environment and other factors which may interfere
with or block the transmission signal:
large metallic objects such as fridges, mirrors, wardrobes, metal doors and reinforced

concrete
fixed structures (walls) or radio, electrical and electronic appliances such as TVs, PCs,

mobile phones or dimmer switches
NOTE: We recommend keeping a minimum distance of one metre between the
baby unit and interfering devices, or switching the latter off. In case of weak signal, we
recommend moving the parent and/or baby unit to a different place in the room.
Turn the volume switch („volume") up or down to increase or reduce the receiver volume
of the parent unit.
NOTE: If the volume is turned all the way down, no sound will be transmitted.
Always disconnect the mains adapters from the wall power socket before cleaning the
unit. Only use a slightly dampened cloth. Do not submerge the unit in water. Do not use
chemical detergents.
Remove the batteries from the unit if it is not to be used for a long period of time. This
product does not require any special maintenance. Repairs to the unit must be carried out
by skilled personnel only.
Tips for extending the range
Volume control / parent unit
Cleaning and maintenance
GB
17