Silverline 672976 Mode D'emploi page 4

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
WARNING: Moving parts can cause crush and cut injuries.
DO NOT use with compressed gas cylinders!
Caution!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They
contain traces of oil and other lubricants. Please recycle where
facilities exist. Check with your local authority or retailer for
recycling advice.
Technical Abbreviations Key
n
o
n
Nm
psi
°
Ø
W, kW
/min or min
-1
rpm
BSP
dB(A)
m/s
2
4
No load speed
Rated speed
Newton metres (torque)
Pounds per square inch
Degrees
Diameter
Watt, kilowatt
Operations per minute
Revolutions per minute
British Standard Pipe (thread)
Decibel sound level (A weighted)
Metres per second squared
(vibration magnitude)
Original Instructions
Specification
No load speed: .........................................................15,000min
Backing pad: .............................................................Ø50mm (2")
Orbit variation: ......................................................................3mm
Maximum operating pressure: .............................6.3Bar (91.3psi)
Air Consumption (CFM): .................................. 4CFM / 113Ltr/min
Inlet connection: ...............................................................¼" BSP
Oil specification: ..............................................Generic Air Tool Oil
Weight: ............................................................................. 0.62kg
As part of our ongoing product development,
specifications of Silverline products may alter without notice.
Sound and vibration information:
Sound Pressure L : ..........................................................96dB(A)
PA
Sound Power L : ...........................................................107dB(A)
WA
Uncertainty K: .........................................................................3dB
Vibration emission value a : ..............................................2.5m/s
h
Uncertainty K: ...................................................................1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to ISO 15744 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
-1
2
2