SATA air star F Mode D'emploi page 73

Content [Original Version: German]
1. General information ...............73
2. Safety Instructions .................75
3. Use ........................................77
4. Description ............................77
5. Scope of Delivery ..................77
6. Technical Design ...................77
7. Technical Data .......................78
8. First Use ................................78
Read these operating instructions thoroughly and carefully before com-
missioning and use. Comply with the safety instructions and danger
warnings!
Always make sure that these operating instructions are kept with the
product or keep them easily accessible for everyone at any time!
1. General information
1.1. Introduction
The SATA air star F, hereinafter "half mask", provides the user with clean
air for breathing.
1.2. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.3. Accident prevention
As a basic rule, compliance is required with the respective national ac-
cident prevention regulations and correspondingly pertinent stipulations,
guidelines and instructions. For users of breathing protection equipment,
compliance is required with the prescribed medical examinations in terms
of personal suitability together with the necessary intervals and scopes of
corresponding industrial health check-ups.
In Germany in particular, due consideration must be given to the pertinent
principles of the trade association with regard to industrial health check-
ups, and to the pertinent regulations pursuant to breathing protection
code of practice DGUV Rule 112-190. Where appropriate, amendments to
Operating Instructions SATA air star F
Read first!
10. Maintenance and repairs .......80
11. Care and storage ...................81
12. Disposal .................................82
13. After Sale Service ..................82
14. Accessories ...........................82
15. Spare Parts ...........................83
16. EC Declaration of
Conformity .............................83
EN
73